This RP2040 Devboard is a board with a similar pin out as the Seeed Studio Xiao RP2040.
This was created as using full sized-picos takes more room from your board, whilst you need few pins for a oled display that updates from the web or other low complexity device.
You interface with it via the:
- USB-C Port
- RESET Button
- BOOTSEL Button
| Left Side Pins | Middle | Right Side Pins |
|---|---|---|
| GPIO Pin 26 (ADC0) | USB - C Port | 5V / VBUS |
| GPIO Pin 27 (ADC1) | GND | |
| GPIO Pin 28 (ADC2) | +3V3 | |
| GPIO Pin 29 (ADC3) | GPIO Pin 3 | |
| GPIO Pin 6 | GPIO Pin 4 | |
| GPIO Pin 7 | GPIO Pin 2 | |
| GPIO Pin 0 | GPIO Pin 1 | |
| SWD | GND | SWCLK |
- gerber.zip
- BOM.csv
- CPL.csv