Delta Forge is a compact, high-performance delta style 3D printer inspired by the design of the delta flyer.
Delta.3D.Printer.Video.mp4
The vision for the Delta-Forge was to:
- Rigid all-metal frame and a linear rail motion system to achieve high-speed & keeping high quality prints.nts.
- A small form factor that doesn't sacrifice build volume unnecessarily. Ideal for a desk or a small workshop.
- Draw inspiration from sleek sci-fi designs, moving away from a purely utilitarian look. I want to make it something I proud to display!
- Use commonly available parts and components
Well in simple words I am addicted to 3D printers design & since I don't own oen I want to get my hands on every type of 3D printer that is out there!ere!
- Fully aluminum extrusion!
- MGN9C linear rail motion system for precision
- Compact 120mm heated
- BTT Manta E3EZ + CB1
| Qty | Item | Notes |
|---|---|---|
| 3 | 350mm T-Slot 2020 Extrusion | Vertical columns |
| 48 | M5 x 10mm Screws | |
| 48 | M5 T-nuts | For extrusion |
| 3 | 300mm MGN9C Linear Rails | For carriages |
| Qty | Item | Notes |
|---|---|---|
| 1 | POWGE GT2 6mm Belt (4m) | Belts |
| 3 | POWGE 20T Pulley (5mm Bore) | Stepper pulleys |
| 3 | POWGE 20T Toothed Idler | |
| 1 | F695 Bearings (Pack of 10) | Raindew recommended |
| 4 | Nema17 Stepper Motors | High torque |
| Qty | Item | Notes |
|---|---|---|
| 40 | M3 x 6mm | For Panels |
| 13 | M3 x 8mm | For Effector, Idler Slides, Belt Clamps |
| 2 | M3 x 12mm | For 3010 Fan |
| 3 | M3 x 16mm (button head) | For bed |
| 12 | M3 x 20mm | For effector arms and 5015 fan |
| 12 | M3 x 25mm | For motor mounts |
| 3 | M3 x 30mm | For belt tensioners |
| 3 | M5 x 16mm (button head) | For idlers |
| 1 | M3 Heatsets (300 pcs, D5.0 x L4.0) | Always good to have |
| 1 | 1000mm CF Rod (5mm OD, 3mm ID) | Cut to 105mm |
| 2 | 3mm x 25mm Dowel Pins | For glue jig |
| 1 | 3mm Threaded Rod | Cut into ~30mm sections |
| 12 | MP Jet Ball Joints (2 packs) | High-quality link joints |
| 6 | 6mm x 3mm Magnets | |
| 18 | M3 T-nuts | For linear rail mounting |
| 4 | Feet | Printer feet |
| Qty | Item | Notes |
|---|---|---|
| 1 | BMG Clone Dual Gear | Extruder |
| 1 | TL TR6 Hotend | High-temp capable |
| Qty | Item | Notes |
|---|---|---|
| 1 | 120mm 24V Heater | Heating element |
| 1 | 120mm PEI Sheet | Build surface (optional) |
| 1 | 150mm x 4mm Aluminum Bed | Used with BuildTak in project |
| Qty | Item | Notes |
|---|---|---|
| 1 | 24V 8A/10A AC Adapter | Power source |
| 1 | Optical Endstop | Delta homing |
| 1 | Manta E3EZ + EZ2209 Drivers | Main control board |
| 1 | BTT CB1 + Heatsink | Compute module |
| 1 | 3010 24V Fan (GDSTIME) | Hotend cooling |
| 1 | 4010 12V Fan (CB1 cooling) | Quiet fan via 5V TFT port |
| 1 | 5015 24V Fan (GDSTIME) | Layer cooling |
| 1 | TL Nozzle Probe (optional) | Auto bed leveling |
- $360
- predicted to be 400 dollars but it is lower due to AliExpress about 350$ discount coupon & also not that some parts, such as screw, are ordered in bulk as not available in single quantities!ies!
This project is licensed under the MIT License.
See the LICENSE file for more details.