Screwdriver Set Case with compartments for Nuts and Bolts
Description
PDFSeedBox
Case for Taparia Screwdriver Sets
The SeedBox is a custom, hand-crafted storage solution designed specifically for the classic Taparia Screwdriver Set (1 Handle + 5 Bits). Whether the original plastic case has finally given up or you just want a more secure, "workbench-ready" enclosure, the SeedBox is the best drop in aesthetic replacement with a functional snap-fit design.
Key Features
Perfect Fit: Custom-molded slots for 1 standard Taparia handle and 5 interchangeable bits.
Zero-Hardware Hinges: Features self-sufficient, snap-fit hinges. No screws, bolts, or metal pins are required for assembly.
Snap-Lock Closure: A secure integrated latch keeps your tools from spilling, even if dropped.
Multi-Color Ready: The design is split into individual files so you can achieve a high-end two-tone look (like the orange and white shown) without needing a multi-material printe.
SeedBox Branding: Part of the "SeedBox" workspace series, designed for a clean, industrial look.
Technical Specifications
Dimensions: 146mm (L) x 60mm (W) x 43mm (H)
Compatibility: Standard Taparia multi-bit driver sets.
Print Settings & Recommendationsions
Filament: PLA for rigidity, or PETG/ASA for extra durability in a toolbox environment.
Supports:
Top Lid: Requires supports for the design aesthetics and hanging hinges.
Base: Some supports are required for the hinge overhangs.
Infill: 15-20% (Gyroid or Grid recommended for strength).
Walls: 3+ walls to ensure the snap hinges have enough structural integrity.
Layer Height: 0.2mm works perfectly.
Assembly Instructions
Print the Top, and the two caps in orange and Bottom in white (if you follow the same color pattern).
Clear any support material from the hinge and latch areas.
Align the snap-fit hinges.
(Optional) Add small rubber "bubble" feet to the flat bottom to prevent the case from sliding on smooth surfaces.
Designed by Krish
If you like this design, please consider leaving a Like or posting a Make!
Tags
Model origin
The author marked this model as their own original creation.
License
This work is licensed under a
Creative Commons (4.0 International License)Attribution-ShareAlike
