A printer designed in almost 24 hours somewhere around 40-50 hours.
Long story short, I didn't realize I still had time to submit things to Hack Clubs Highway event--until I had almost exactly 24 hours left. So, I made this. This monstrosity is a double hbot with a custom toolhead based on the Peopoly Lancer Long, capable of using a Bambu Labs A1 Mini build plate.
Second story slightly longer, I got some extra time when I was asked to do a re-review and decided to make a double hbot. Still the same size (roughly), but now it has twice the drive motors and triple the insanity. Hence the rename to being the Monstrosity.
| PART | UNIT COST | QUANTITY | SPONSORED? | NOTES | ROW COST | SOURCE |
|---|---|---|---|---|---|---|
| BTT Octopus w/ 6 drivers | $59.65 | 1 | FALSE | I'll be asking many companies for a sponsorship for a mainboard | $59.65 | link |
| Linear Rail Shipping | $39.00 | 1 | FALSE | $39.00 | link | |
| 10 pack of 1m 2020 extrusion | $44.01 | 1 | FALSE | $44.01 | link | |
| Peopoly Lancer Long | $42.00 | 1 | FALSE | $42.00 | link | |
| T8x4 Leadscrew 250mm | $10.95 | 3 | FALSE | $32.85 | link | |
| MGN9H 250mm Linear Rail | $9.97 | 3 | FALSE | Not told of the final cost until checkout because of custom length | $29.91 | link |
| MGN9H 316mm Linear Rail | $9.97 | 2 | FALSE | Not told of the final cost until checkout because of custom length | $19.94 | link |
| GT2 6mm Belt 1600mm Belt | $9.95 | 2 | FALSE | $19.90 | link | |
| Bed | $17.19 | 1 | FALSE | Custom made by JLC or PCBWAY, probably sponsored. | $17.19 | |
| Roborock CPAP Blower | $15.76 | 1 | FALSE | $15.76 | link | |
| HGX Gear Set | $15.06 | 1 | FALSE | $15.06 | link | |
| BTT Eddy Duo | $26.26 | 1 | FALSE | $26.26 | link | |
| PEI Plate and Magnet | $26.76 | 1 | FALSE | $26.76 | link | |
| GT2 6mm 20t Pulleys | $6.26 | 2 | FALSE | $12.52 | link | |
| D5x30 Smooth Pin | $11.50 | 1 | FALSE | $11.50 | ||
| F695 Flanged Bearing 10x | $6.87 | 1 | FALSE | $6.87 | link | |
| MGN12H 265mm Linear Rail | $10.71 | 1 | FALSE | Not told of the final cost until checkout because of custom length | $10.71 | link |
| BTT EBB36 | $9.40 | 1 | FALSE | $9.40 | link | |
| 42mm Nema 17 Stepper Motor | $4.72 | 7 | TRUE | LDO Sponsorship | $0.00 | link |
| Extruder Motor | $18.30 | 1 | TRUE | LDO Sponsorship | $0.00 | link |
| 4010 Hotend Fan | $1.53 | 1 | FALSE | $1.53 | link | |
| 100x T Nuts | $0.99 | 1 | FALSE | $0.99 | link |
The overall cost is $441.81
note: this uses an old photo of the design, but the wiring is the same.
Thanks to the Voron team for publishing their kinematic Z mounts under the GPL license as part of the Voron Trident. This machine drew a lot of inspiration from the way the bed was used on the Trident.
The Monolith gantry by CloakedWayne was previously used in this design and a modified version of the 6mm belt tensioning system is used.
