Demo vid

its a keyboard, but its very impractical.

short tap for moving to the next character, long tap to type it.

it uses a xiao which has all the gpio pins internally connected. how does that even happen lol

1. a broken xiao which has all the gpios internally connected
2. a usb cable
3. a breadboard
4. a cardboard box
5. some tape
6. some hackclub stickers
7. an arcade button
8. a marker pen you need to borrow from herby without asking
9. some jumper cables

• take an arcade button and the broken xiao
• just connect the arcade button to any gpio pin (assuming you have a xiao where every gpio pin is internally connected) and 3v3
• connect the arcade button to the xiao
• put everything into said cardboard box
• tape up the cardboard box
• paste some stickers on it
• use the marker pen you borrowed from herby without asking to draw some stuff on it
• install circuitpython on it
• copy code.py into the circuitpython folder
• now you should use it!

just connect the usb cable to your laptop, open a serial terminal, and use it.

we dont talk about that