Fume Hood
Description
PDFRecommended to print on a 0.4mm nozzle at 0.2mm layer height. bsp;
This fume hood operates a window that (optionally) can have a cut out water bottle, clear plastic tape, or a 3d printed window out of clear filament. If you have none of those feel free to print the window out of PLA and it'll just be a more limited view through the bottom.
The handle stopper can be screwed in against the right wall to prevent it from moving due to the window's weight.
Every part has 0.4mm tolerances. The only exception is the crank pieces have 0.15mm tolerances because the connecting pieces since those need to be very tight.
Model origin
The author marked this model as their own original creation.
License
This work is licensed under a
Creative Commons (4.0 International License)Attribution
