ESPCTL

your ESP32 controllable from Python and your browser. No install, no cloud, 100% locally on your machine add one line to your firmware and get a live data + control panell

espctl is an arduino header only library for esp32 along with a python package and web serial browser client which are connected by a shared line based serial protocol ( read below for more info about the espctl protocol)

the python package could be used to colled data frames via pandas and matplotlib to plot the live graphs along with regular CRUD operations

Why ESPCTL?

reflashing your board each time and waiting for arduino to compile everything?? trying to mentally plot a wall of Serial.println numbers. and nobody needs an account or cloud dashboard to drag a slider on a project that's liteterally six inches from their laptop plugged into the same usb cable

ESPCTL fixes all of that with one header file. You declare your controls in firmware, plug in, and a live plot + working widgets just show up in Python, in your browser, whatever. No setup, no cap..

Features

• easy one line setup - #include "espctl.h"
• auto generated web ui
• easy native python access - widgets are plain attributes: board.threshold = 120
• data logging - record data into a csv or pull a pandas DataFrame
• live plotting - matplotlib for live plots of data
• gpio read/write - access gpio directly without tweaking the firware
• browser flashing - flash your mcu directly from the browser

Quick Start

1. Arduino library

copy firmware/espctl.h to your sketch and:

#include "espctl.h"

ESPCtl board;


void setup(){

    board.begin() // serial @ 921600 baud

    board.addSlider("threshold", 0, 255, 100)

    board.addToggle("ledOn", true);

    board.addValue("bpm");

}

void loop(){

    board.data("bpm", readBPM());

    int t = board.getSlider("threshold");

    board.update // MUST BE CALLED EVERY LOOP

}

you can also refer to examples/blink.ino for a working sketch

2. Python client

pip install espctl

from espctl import ESPCtl

import time

board = ESPCtl()

print(board.bpm) #write

board.threshold = 120 #read


with board.record("session.csv"):
     time.sleep(60)

df = board.to_df() # pandas df

board.plot("bpm") # matplotlive

3. Web client

open web/index.html and use it directly to connect to the board

espctl protocol:

all msg are new lines over serial - baud 921600

firmware to client

Schema sent on boot
$S{"widgets":[{"id":"bpm","type":"value"},
{"id":"threshold", "type":"slider","min":0,"max":255,"value":100}]}
}

data update
$D,

pin state
$R,

anything without "$"
normal log
 without "$"
normal log
al log

client to firmware

? -> request schema
!, -> set a widget
>,<0|1> -> write GPIO
< -> read GPIO
> write GPIO
<<pin> -> read GPIO
IO

Contributing

Issues and PRs welcome. Good first contributions: testing on more ESP32 dev boards and reporting port detection quirks, imporving error messages, add more example sketches, add more widgetss

Scope (v0.1)

Supported: ESP32(classic) only Widgets - slider, toggle, and value Live plots - only 1 1

future plans (v0.2)

other chips - esp8266, S3, C3 more widgets multi plotot

License

MIT