I have always wanted to make something like this to save me time in the morning morning. Taking the 3 minutes to weigh out the beans manually is the largest waste of time I have ever taken part of. So in order to become the most efficient being on earth, and ascend to a higher plane of existance. I need to have something automatically weigh my coffee beans.

1. print each part from the step file! MAKE SURE you print the auger sideways
2. Screw the gear with 3 holes into the load cell
3. =
4. Screw that into the base! 5..
5. Screw the 180 deg servo into the gear for it 7..
6. Screw that into the base
7. 
8. Screw the tray onto the other end of the load cell
9. 
10. insert the auger into the top
11. 
12. Screw the side plate onto the top
13. 
14. put a screw through the backplate, gear, and auger
15. 
16. screw the gear onto the top servo 19..
17. screw the top servo onto the top side plate
18. 
19. Screw the top peice onto the bottom
20. 
21. Hook up everything according to this diagram
22. 
23. put the electronics on the sides of the top piece using double sided tape or hot glue