Add TyrannoJ Projekt2 #542
Conversation
|
The latest updates on your projects. Learn more about Vercel for Git ↗︎
|
M0HID
left a comment
M0HID
left a comment
Hi! It looks like you've accidentally added your files to root of the repo, they need to be in the hackpads/ folder! Could you move them please so i can review this. Thanks!
|
It should be fixed now, sorry for that I'm a bit new at github, pleas tell me if there is something else missing |
|
Should I also delete my first upload? |
|
I deleted the falsely uploaded directory |
Overlord-Runt
left a comment
Overlord-Runt
left a comment
hihi, nice hackpad! but it seems you have a broken image in your readme. other than that it should be good
|
I think it should work now |
Overlord-Runt
left a comment
Overlord-Runt
left a comment
approved. fill out https://forms.hackclub.com/hackpadv2 to get your hackpad
|
Hello,
I don’t exactly know the shipping costs what should I put in this field on the form
Kind regards,
Julius Megerle
Von: Taran Mittal ***@***.***>
Gesendet: Dienstag, 21. Oktober 2025 11:44
An: hackclub/hackpad ***@***.***>
Cc: TyrannoJ ***@***.***>; Author ***@***.***>
Betreff: Re: [hackclub/hackpad] Add TyrannoJ Projekt2 (PR rojekt2 (PR kt2 (PR #542)
@Overlord-Runt approved this pull request.
approved. fill out t https://forms.hackclub.com/hackpadv2 to get your hackpad
—
Reply to this email directly, view it on GitHub
|
|
you can go to the checkout and see how much it charges for shipping. You can just close the tab without paying and it wont charge you for anything |
|
what checkout? To be clear I need this Info for the form |
|
Is this for the PCB or what is it for? |
|
sorry for the late reply, i was sick, yes it is for the pcb |
|
go to the checkout at jlcpcb and go all the way to the point where you have to pay. and then dont pay since you dont have money. |
|
no, this is for the how much money do you need from grant, this must include shipping costs section of this form https://forms.hackclub.com/hackpadv2 |
|
can you send a ss of what the problem is here? you should have the cost with shipping shown to you at checkout. |
|
|
are you on the right form? i dont see that field when I open the form |
|
i#m on this form https://forms.hackclub.com/hackpadv2 |
|
okay i have no clue what form you are actually on but just go to jlcpcb.com and go through the steps to order your pcb, go all the way to the checkout and see how much it costs in total with shipping. that is how much you put for the grant box. |
|
ok |
3 participants
Ready to submit your project? Nice job! Hopefully you've read the submission guidelines. If not, make sure to read them first.
Check off the following to let the reviewers know you've done everything:
[] I HAVE RAN DRC ON MY DESIGN WITH ZERO ERRORS (Silkscreen errors are okay))
[] I HAVE BRANDED ALL MY PARTS (PCB, CASE) WITH MY HACKPAD'S NAMEE
[] I HAVE MADE SURE MY 3D PRINTED PARTS DO NOT REQUIRE SUPPORTS (Text branding overhang is okay))
[] I HAVE MADE SURE TO INCLUDE TOLERANCES (0.25mm))
[] MY HACKPAD'S PCB IS UNDER 100mm x 100mm, I DO NOT HAVE MORE THAN 16X SWITCHES, 2X ROTARY ENCODERS, 1X OLED, 16X LEDS..
[] IN MY FOLDER, THERE IS A README.MD FILE THAT CONTAINS THE FOLLOWING INFORMATION::
If you're unsure about the format, make sure to check out this example and follow the format there.
If this PR isn't a submission, that's okay too! Please remove the above boxes and explain what the pull request is for! If there's anything about this PR template that seems confusing, send a message in #hackpad in slack!