Teapad is a KMK based 3 by 3 macropad in the shape of a teapod.
This project is based of the amazing Hackclub Hackpad template.
The Case is held together by 6 M3 Bolts and nuts.
Printable Parts are located in the production directory.
The PCB was created in KiCad, source Files are located in the PCB directory.
At the moment, the KMK firmware just calls Shortcuts I use for voice chatting or music and opens some programms via the os lib. Customizable QT Frontend to change these and implement LED Status codes is comming soon ™️..
- 1x Seeed XIAO RP2040
- 2x Through-hole 1N4148 Diodes
- 9x Cherry MX Switches
- 9x DSA keycaps
- 6x M3x16mm screws
- 6x M3 nuts (self provided)
- 1x Case (1x Top, 1x Bottom)