M-Pad

A Hackpad but this time made for media with 3 dedicated keys for Back, Play/Pause, and Skip along with volume controls via a rotary encoder. Powered by kmk on circuitpythonn

• The lid is here
• The case is here
• Fusion 360 file is here

• BOM
• LCSC Component BOM

1. Download the latest release of circuitpython from here
2. whilst powering the Seeed Studio XIAO RP2040, hold down the boot button and plug it into your computer. The board should show up as a USB drive called RPI-RP2.
3. Drag and drop the downloaded UF2 file onto the RPI-RP2 drive. The board will reboot and show up as a USB drive called CIRCUITPY.
4. drag and drop the contents of the firmware folder onto the CIRCUITPY drive.
5. Restart the board and it should now be ready to use.

1. Hold the middle switch whilst plugging in the board to your computer. The board should show up as a USB drive called CIRCUITPY.
2. Edit it as if it is a normal drive.