So this is my project ultimate flipper dev board that combines an nrf box, gps neo module, wifi module CC1101 and storage module into a sinlge module while exending wifi ranfe of flipper to beyond 100m, this is really cheprr compared to the commercially available boards built 1/3 of the cost for the full board often the available boards do 1 or 2 things like there are diff modules the nrf module does the nrf task . wifi module does wifi gps gps and cc101 radio and this should combine it all into a single boardard

what my board does compared to othrs, wifi pentesting from about 100m+ most modules allow 25 m range, nrf capabalitis and ble testing from 100 m, usage of gps related functions from flipper, cc1101 will allow mw to opeart rf applications from far away.

im also designing the case for this but therer a problem like i cant do that until i can physically because adding 3d models of external modules on pcb then designing a case around the case WIll need changes depending on part availibility

view the 3d model here- https://cad.onshape.com/documents/c430f21f33defa377d0e0f0f/w/f997e1d9ea8b711ac69e3233/e/4b421913023080162e21c2db?renderMode=0&uiState=684e49af4ea69c0d7908353d353d

biggest problem is getting parts many like cc1101 arent avaioable at vendors accepting hcb si this cam mess the budget pcb with components

budget is 53$ compeletely , same board from rabbit labs costs 200$ so its good didnt go from compelete pcba as it increases cost so much and then ill have same amount of customs threaded inserts and bolts cost about 1.5 dollars and shippig of same damn so will try local vendors my own coststs

only case as neeed

time spent- 5 hrs