A simple box that shows my spotify status and can play the song through spotify connect.

To build this you would only need

1. A 1.8" TFT Display Module
2. A MAX98357A I2S DAC Class D Mono Amplifier Module
3. Seeed Studio XIAO ESP32-S3 Microcontroller Board
4. Lipo Battery of your choice (I'm using two 600 mAh 602025 lipo)

Here's the complete BOM I used:

For the case you can either print it yourself or use a service like BDtronics or JLC3DP

To build it yourself use the print 3d files in CAD/PrintParts to 3D print the parts. Then wire the components according to this wiring diagram.

Now put everything inside the case and screw the back side in and its done.

** If you need to change or modify anything use the OnShape document here: https://cad.onshape.com/documents/127f76d6721a894aa68b7aad/w/a87aa85b129c19d2610ae0ad/e/92650a9be47494a4742bc179 (Just make a copy and do your modifications)**

Here are some pics (will update once I finish building it IRL)