This is a 3x3 macropad that uses black cherry keyswitches and a raspberry pi pico 1w made to be used with AutoHotKey
| Qty | Name | Datasheet | source | unit cost | Total cost |
|---|---|---|---|---|---|
| 1 | RaspberryPi_Pico 1w | https://datasheets.raspberrypi.com/pico/pico-datasheet.pdf | https://www.pishop.us/product/raspberry-pi-pico-wh-pre-soldered-headers/ | 13.95 | 13.95 |
| 9 | 1N4148 | https://assets.nexperia.com/documents/data-sheet/1N4148_1N4448.pdf | https://www.digikey.com/en/products/detail/onsemi/1N4148/458603 | 0.1 | 7.38 |
| 9 | Cherry MX2A Black 60g Linear Switch | https://cherry.saas.contentserv.com/admin/rest/document/30?ContextIDs=15343&Language=36e=36 | https://mechanicalkeyboards.com/products/cherry-mx2a-black-60g-linear?variant=48014721286444 | 0.4 | 8.79 |
| 1 | PCB | https://www.pcbway.com/QuickOrderOnline.aspx | 20.06 | 20.06 |
There is a battery thing I am going to use but I tried to find the datasheet and price and couldn't
also the case will be painted and butified phisicly after it is printed
