Animatronic from FNAF(Five Nights At Freddy's: Sister Localtion). This is basically a puppet of another animatronic, funtime freddy. so this animatronic features a 3dof head, eyes with eyelids, a mouth, and movable ears, 3 dof delta spine, 2 dof arms with 2 dof elbows, and the torso is indipendent, which means it can also move on its own. and the animatronic exos were taken from @VomitedThoughts' BonBon Animatronic NHI, huge thx to him! Eye mechs inspired from Will Cogley's vid How to Make a Compact Animatronic Eye Mechanism with 3D Printing and Arduino.
- so i have a tutorial which is low qual but gets the job done.
- i will be making an assemble tutorial vid when i get the chance to make this.
- Google sheets, ive alr included the parts i have, and whats most convinient for me rn - the psu, u can use any power around 5-6v, with 13-15 amps.
- 11 × SG90 → ~0.25A peak each → ~2.75A
- 5 × MG90S → ~0.7A peak each → ~3.5A
- 3 × MG995 → ~2.5A peak each → ~7.5A
- Cadded on fusion360, which is a great design tool. i also have included the timelapses of me designing bonbon in my journal.
- Ive also added clearances, and you do need inserts for this project.
- heres the wiring diagram
- im gonna be using an rpi pico for 16 of the servos, then the 3 mg995 ill be using a breadboard.
- this is meant to be up to the user, so u can do wtver u want to. i reccomend using bottango or if u want u can rc it.