Cuber is an automatic rubiks cube robot that can read the state of a 3x3 cube and solve it using servo motors.
Cuber was funded by and built for Hack Club's Highway program. You can read my journal here.
Want to make your own? Find documentation on how to build it here.
I've spent over 120 hours designing and building Cuber. Read my thoughts here. (TBA)
| Item | Amount | Cost (CAD) |
|---|---|---|
| Esp32 Dev-Board | 1 | $6.24 |
| MG996R 180° Stepper Motor | 6 | $32.67 |
| TCS3200 Colour Sensor | 6 | $24.00 |
| Assorted Dupont Wires | 50 | $7.22 |
| Splice Terminals | 10 | $8.67 |
| 5V 10A Power Supply | 1 | $15.48 |
| Super Glue | 15g | $24.21 |
| 1/4-20 & 4-40 Bolts and NutsNuts | 12 each | $5.00 |
| PLA Filament | 250g | $6.50 |
| Total | $129.99 | |
| Total USD | $94.56 |