so this glow glow ducky is a bedlamp, not really..it could be another useful things, for study lamp or when lights out or another cute lamp! i made this bedlamp for my little sister as gift for her achievement in school! she got first place 🐥 and she likes a little yellow duck! this is my first time working with hardware things! so i try to make the simplest project, Lamp ⚡️.
even in this simplest project i still got so many errors in designing schema..but yeah, trial and error! i plan to improve this glowducky as soon as i learn about Attiny or Atmel, yeaa and i currently learning about Arduino.
wait i'll attach some pics!
so this duck is going to be the case! you need to separate each body parts so you could put the lamp inside! and i plan to use 3d printer for it with white filament, 2 layers and 0% infill
this is the glowduck PCB! and i'll attach the schema
| Component | Specification | Qty for each lamp | Qty buy | Price | Total Price |
|---|---|---|---|---|---|
| LED | 5mm Warm White Strawhat | 2 | 10 | Rp.800 | Rp.8000 |
| Resistor | 330 Ohm | 1 | 5 | Rp.700 | Rp.3500 |
| Switch | 8mmx8mm Latching Push Button | 1 | 5 | Rp.1033 | Rp.5165 |
| Battery | CR2032 | 2 | 1 strip(5pcs) or 2 strip? | Rp.21500 | Rp.21500 |
| Battery Case | 2x CR2032 Holder | 1 | 5 | Rp.3600 | Rp.18000 |
| Wire | AWG 26 | 1 (in meter) | 1 | Rp.1800 | Rp.1800 |
| Wire | Jumper cable male-female | 3 | 1 strip(40pcs) | Rp.9500 | Rp.9500 |
| PCB | Double layer pcb | 1 | 5 | Rp.1000 | Rp.5000 |
| Total | Rp.72465 | ||||
| Total + shipping cost | Rp.129465 |
nb: Price is in IDR, This design is made for minimum quantity (eg: 5 pcs PCB) and some components are not on the pcb (latching button and battery)
