I really wanted to create something I could use for shortcuts while drawing in Clip Studio Paint!
Wiring the PCB to work and removing right angles was hard, but learning Fusion was harder.... Fusion oml...
BOM:
- 6x Cherry MX Switches
- 1x XIAO RP2040
- 6x Blank DSA Keycaps
- 6x M3x16 Bolt
- 6x M3 Heatset
- 1x 0.91 inch OLED
Others:
- KMK Firmware
- Top Case.stl
- Bottom Case.stl
| Schematic | PCB | Case |
|---|
| 
| 