It is L shape micropad. It is my first project. Thanks to hack club, I got a chance to design it.I have always faced many problems in remembering the shortkeys , so i added my most used shortkeys. It's design is inspired from sandwich, its case has no wall which gives it fi look . It can be attached with keyboard as it is L shaped. It has 12 keys and some leds.
I have design this PCB using KiCAD. Here are some pictures..
I also have make holes with smooth out Conners so it won't wobble.
It is 3d image of my PCB design.
I have designed the case using fussion 360 . The design is consist of just two plates top and bottom plate. Here is image of top plate.
Here is image of top plate.
Here is image of both top and bottom plate assemble.
here is image of whole micropad or L_PAD.
I have use KMK for my firmware.These are the keys which will on my L_PAD.
Row 1: Essentials (2 Keys)
Key 1: Copy (Ctrl + C) Key 2: Paste (Ctrl + V) Row 2: VS Code Navigation (2 Keys) Key 3: Command Palette (Ctrl + Shift + P) Key 4: Quick Open File (Ctrl + P)+ P)
Row 3: ML - Google Colab (4 Keys)
Key 5: Run Cell and Move (Shift + Enter) Key 6: Run All Above (Ctrl + F9) Key 7: New Code Cell (Ctrl + M then B) Key 8: Interrupt Execution (Ctrl + M then I) I)
Row 4: Power User Navigation (4 Keys)
Key 9: Task View (Win + Tab) Key 10: Clipboard History (Win + V) Key 11: Reopen Closed Tab (Ctrl + Shift + T) Key 12: Quick Switcher (Alt + Tab)ab)
Here should be everything you need to make this hackpad
12x Cherry MX Switches
12x DSA Keycaps
4x M3x16 Bolt
12x SK6812 MINI Leds
12x 1N4148 DO-35 Diodes.
1x XIAO RP2040
1x Case (top_plate and bottom_plate)
late)