Slack Username: @e
A pcb badge for your lanyard! press the buttons on their respective sides to buzz something as the truth or a lie and light up the LED (if its a lie it buzzes). There is a hole to be hooked on a lanyard, and another hole in the middle, where you can add a DIY dial.
| Id | Name | Footprint | Quantity |
|---|---|---|---|
| 1 | Battery Holder | BatteryHolder_Keystone_3034_1x20mm | 1 |
| 2 | LED | LED_D5.0mm | 2 |
| 3 | 220 Ohm Resistor | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | 2 |
| 4 | Push Button | SW_PUSH_6mm | 2 |
| 5 | Vibration Motor | VIBRATIONMOTOR-TH_LCM0827A3038F | 1 |
