| Schematic | PCB | 3D Model |
|---|---|---|
 |
 |
 |
| Part Number | Part Name | Quantity | Sourcing Link | Cost | Notes |
|---|---|---|---|---|---|
| 1 | PCB | 1 | https://jlcpcb.com | $37.82 | |
| 2 | M3 Nut | 6 | https://www.aliexpress.us/item/2255800416538696.html | $1.18 | |
| 3 | M3x8mm BHCS | 6 | https://www.aliexpress.us/item/3256804345288240.html | $1.48 | |
| 4 | M3x6+6 Standoff | 6 | https://www.aliexpress.us/item/3256805275813321.html | $3.03 | |
| 5 | Acrylic Sheet | 1 | https://a.co/d/0dpcT7Jb | $8.66 |
- Place your PCB inside the bottom case
- Screw the standoffs through the holes in the PCB and case and into the nuts below
- Press the middle case into the bottom case
- Place the acrylic on top of the middle case and screw it in with the bolts.
Thank you to Hack Club for supporting me during this project!