ESP32 Touch HUB

Made the Back plate of the Case along with adding the holes slots etc for the card type c port and LEDs made a mistake while designing accidently joined all the bodies together lol

did a majority of the CAD for the HUB making the main enclosure and properly aligned the holes for the dispaly

Ran the DRC made some changes got the 3d view had to fix a few part nothing much

Added some markers on The Silk screen along with chaning the footprint of the SD card holder i chose the most common one out there

i have completed the preliminary routing of the PCB is done all the part are routed for the first time which i thut were the best path however i will need to take more look on it make it perfect

Assigned footprints to the symbols along with arranging the components on the PCB at the places i want them to be

Completed wiring of the Display SD card and the 3 keys that i will be using for navigation on the display. Even tho the display can have its own sd card but still i will be adding a microsd card slot on the main board so that it looks clean i can use a micro Sd card instead

Soo i completed the power part of the circuit the board will have both 3.3v and 5v on board and wanted to add a extra thing which is the system will charge it elf and power the system simultaneously when i plug it in its called load sharing and it was my first time doing so so took me a lot of time figuring it out https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/UserGuides/51746a.pdf

I took refernce from the data sheet https://www.lcdwiki.com/res/MSP3520/MSP3520_Size.pdf and made symbol and footprint for the display to be used

I started out by charting the features I would like to have on that HUB since my aim is to getting a device with which i will use and control all my other esp32 web projects

other thing done is completing the basic circuit for ESP32 S3 and the programming IC which here is CH340C