Flexi Toys Trio
Description
PDFFlexi Toys Trio: Squirrel, Triceratops, & Dolphinphin
Bring some movement to your desk with this collection of Flexi Toys! This set includes three unique, fully articulated designs: a playful Squirrel, a sturdy Triceratops, and a sleek Dolphin.
All models are designed to be Print-in-Place, meaning they require no assembly and no supports. Just slice, print, and watch them come to life!
The Collection
Flexi Squirrel: Features a multi-segmented bushy tail that curls and moves realistically.
Flexi Triceratops: A prehistoric favorite with a segmented body and tail for a "walking" wiggle.
Flexi Dolphin: A smooth, aerodynamic design with fluid motion from nose to tail.
Print Settings
To ensure the joints move freely right off the bed, I recommend the following settings:
Setting | Recommended Value |
Material | PLA (works best for articulated joints) |
Layer Height | 0.2mm (or 0.16mm for smoother joints) |
Infill | 15% - 20% (Grid or Gyroid) |
Perimeters | 3 walls (for better joint durability) |
Supports | NONE (Designed to be support-free) |
Adhesion | Brim recommended if you have bed adhesion issues |
Did I mention that it prints within an hour ?
Pro Tips for a Successful Print
Bed Leveling: Since these models rely on small gaps between segments, a well-leveled bed is crucial to prevent the first layer from merging the joints together.
Cooling: Ensure your part cooling fan is at 100% after the first few layers to keep the overhangs on the joints clean.
Scaling: These can be scaled up easily, but be careful when scaling down (below 60%), as the tolerances between joints may become too tight and fuse.
Love the models? I’d love to see your prints! Please share a Make and let me know which color combination you used.
Tags
Model origin
The author marked this model as their own original creation.
License
This work is licensed under a
Creative Commons (4.0 International License)Attribution-ShareAlike
