hackpad for hackclub blueprint i made in 18 hours

here's what it looks like: i made it in fusion 360 about a month agoo

this is what i came up with i hope it works

i used QMK's firmware, this proved to be the most confusing hardest part of the project in my opinion thats why i left it on hold for a long time but i managed to figure it out eventually

4x DSA Keycaps 1x XIAO RP2040 1x Case (2 3d printed parts) 4x Cherry MX Switches(or any switch as long as it works) 4x screws (optional)nal)