• 8x Cherry MX switches
• 1x EC11 Encoder
• 1x PCB
• 9x Through-hole 1N4148 Diodes
• 16x SK6812 MINI-E LEDs
• 1x 0.91 inch OLED displays
• 8x Blank DSA keycaps
• 1x Seeed XIAO RP2040
• 1x 3D PRINTED CASE

I want to make a few iterations on the case when I physically have the PCB so for now it is just temporary to get the sizing right.

I also need to review the firmware when I assemble the pcb.

• There is a option to add a level switcher to make the signalling better for the LEDs but for now I'm just going to bridge the pads and skip it.