This is my completed hackpad mad for Farming Sim 25
I wanted to create a macropad that helped me with Farming Sim 25. I wanted to be able to control my tractors from one macropad
I wanted to add on an extra challenge, so I created the G code for milling the base of my case at my Dad's machine shop. This added a lot of extra challenge, but helped me gain ne insight into this field on engineering..
- 3D Printed top case and a bottom machined out of Aluminum
- 128x32 OLED Display
- 6 Keys
BOM:
- 6x Cherry MX Switches
- 6x DSA Keycaps
- 4x M3x16mm SHCS Bolts
- 6x 1N4148 DO-35 Diodes.
- 1x 0.91" 128x32 OLED Display
- 1x XIAO RP2040
- 1x Case (1 printed parts)
Others:
- KMK Firmware
- Top Case.stl
| Schematic | PCB | Case |
|---|---|---|
 |
 |
  |