This is a 12 key macropad that makes use of a rotary encoder and an OLED display. The body was designed in Fusion, and it uses QMK firmware.

• 128x32 OLED Display • EC11 Rotary Encoder • 12 Keysys

Here's the PCB:

The case is secured using 4 M3 bolts and heatset inserts. The PCB is held in place in a sandwich arrangement.

It has two separate printed pieces: the base, and the top cover.

Made in Fusion.

This hackpad uses QMK firmware for everything.

I will work more on the firmware once the hackpad is physically set up.

Here should be everything you need to make this hackpad

• 12x Cherry MX Switches
• 12x DSA Keycaps
• 4x M3x5x4 Heatset inserts
• 4x M3x16mm SHCS Bolts
• 12x 1N4148 DO-35 Diodes.
• 1x 0.91" 128x32 OLED Display
• 1x EC11 Rotary Encoder
• 1x XIAO RP2040
• 1x Case (2 printed parts)