This is my macropad! This was made for Highway.
- 1x RP2040 XIAO
- 8x Cherry MX Switches
- 8x Diodes
- 1x 128x64 SSD1306 OLED
- 4x Screws
- 1x 3D Printed Case
This was my second iteration. The first one was made during Hackpad V1. The first time around, I was new to PCB and 3D design. I worked for at least 10 hours, but it just didn't work. This time, I finished this whole project in roughly 3 hours!
