A lover, not a fighter.
⚠️ Not to mock or make light of warefare
A 4-channel RC system consisting of a Arduino Nano-based transmitter and a cardboard F-22 Raptor jet powered by brushless propulsion. It uses NRF24L01+ transceivers for communication. Made this as an introduction to aerospace systems, more to come :)
(Cardboard jet hasnt been cut out yet)
| Qty | Device | Link | Cost |
|---|---|---|---|
| 1 | Cardboard 60x85cm | Me | N/A |
| 1 | Motor 2205 2300kv | Link | $0.99 |
| 1 | Propeller 5045 | Link | $5.53 |
| 1 | ESC 20A FMS | Link | $0.99 |
| 2 | Servo 9g | Link | $0.99 |
| 1 | NRF24L01 receiver module | Link | $3.64 |
| 2 | 7.4v 450mah li-po battery | Link | $11.58 |
| 2 | Arduino nano v3.0 | Link | $15.99 |
| 2 | KY-023 joystick | Link | $1.77 |
| 1 | NRF24L01 + PA | Link | $2.30 |
| 1 | Single Pole Single Throw (SPST) Switch | Link | $1.48 |
| 1 | EC11 rotary encoder | Link | $2.15 |
| 1 | Voltage regulator 7805 | Link | $1.95 |
| 2 | 100 µF capacitor | Link | $1.99 |
| 2 | 10 µF capacitor | Link | $1.99 |
| 1 | AMS1117-3.3v | Link | $1.99 |
| 1 | pcb | $20.00 | |
| = $77.32 |
